Module Installation Guide

Chapters:
0:01 – Introduction
0:10 – Warnings
0:37 – Before continuing
0:53 – Checking the content
1:44 – What you will need
2:01 – Remove the bolt covers
3:11 – Open the camera body
5:59 – Remove the circuit board
8:52 – Remove steel frame
10:01 – Remove P6K fan
10:52 – Remove P4K fan
11:09 – Delete the outline of the 1/4/" thread
11:41 – Install the tilt hinge
12:06 – Reinstall the P4K fan
12:32 – Reinstall the steel frame
13:21 – Reinstall the P6K fan
14:27 – Install a new power connector
4:20 p.m. – Reinstall the circuit board
6:50 p.m. – Removing the LCD screen
21:29 – Clean the LCD screen
21:46 – Cutting the housing material for the cable
11:20 p.m. – Assemble the rear section of the camera
24:43 – Install the display ribbon cable
25:27 – Reassemble the camera body
26:21 – Install the V-bracket
27:49 – Assemble the display
29:26 – Install the display
29:49 – Connect the display ribbon cables
31:10 – Final assembly of the display
32:18 – Testing camera features
34:05 – Reinstall the P6K covers
34:47 – Bolt the camera body together
35h00 – Reinstalling the P6K front cover
35:27 – Reinstall the P4K top cover
35:47 – Final reassembly
35:54 – Final camera test
37:12 – Completion

Please take the opportunity to connect and share this video with your friends and family if you find it useful.